48V 230Ah Wall Mount SJY LiFePO4 Lithium Battery For UPS & Solar Inverter

48V 230Ah Wall Mount SJY Lifepo4 Description:

The following description is the description of SJY LiFePO4 Wall Mount 48V 230AH description from data sheet.

1.Product introduction:

This product is designed and manufactured by Shenzhen Saijiaoyang Energy Technology Co., LTD. LFP battery pack, which consists of 16 cells in series, intelligent battery assembly sorting, accurate and reliable. BMS uses a professional protection board test system, which is fully tested before going online to ensure that the battery pack is fully and effectively protected by BMS during use. This product has the characteristics of high energy density, long life, safety and reliability.

51.2v230Ah product height 700mm width 570mm. The thickness of the cabinet is 227.5mm. It is mainly used for communication backup batteries and capacity backup power supplies to meet the requirements of energy storage systems, mixed energy base stations, backup power supplies and home energy systems.

Wall Mount 48V 236AH

2. Function description:

The LFP module keeps the floating charge online when it is fully charged. When the power module output is abnormal (non-output overvoltage), it provides a DC backup function with zero transition time. The built-in battery management unit performs charge and discharge management of the battery pack and provides various of protection functions, at the same time, the module’s

operating status and alarm information are reported via the alarm indication interface RS485.

The RTN (+) ground in Figure 1 is only for illustration. The positive and negative output ports of the external battery pack of the 51.2V236AH LFP battery module must be completely isolated from the module’s metal case

Extreme working range:

The battery is suitable for working in the following range. Unless otherwise stated, the actual operation of the device cannot exceed the following conditions.

Unless otherwise specified, the charge and discharge tests of the battery pack and cell are performed under the environment of temperature 20 ℃ ± 5 ℃, relative humidity 25% ~ 85%, and atmospheric pressure 86Kpa ～ 106Kpa.